What good boarding changes for you
Boards cut for the space
Accurate measuring helps corners, sockets and openings line up neatly.
Secure fixing to suit the wall
The right fixing method depends on the background and intended finish.
Straighter base for finishing
Good boarding gives skimming or jointing a better chance to look right.
A straighter background for the final finish
Sometimes the best way to get a wall straight again is to start with a proper boarded background. Plasterboard can create a clean, level base for linings, partitions, boxed-in pipework and other awkward sections in domestic rooms. With Need A Plasterer 728, we measure carefully, cut boards to suit the space and fix them securely to the right backing. Corners, sockets, switches and openings are all planned in, because a board that is slightly off has a habit of showing you that fact for years.
Board choice and finishing options matter
Board choice and fixing method depend on the room, the surface underneath, the amount of build-up needed and how the finished wall will be used. Once the boarding is in place, we can prepare it for joint treatment or skimming, depending on the job. Choosing Need A Plasterer 728 means you get a straighter starting point for the final finish, not a rushed sheet job that leaves wavy lines later. Where the ceiling itself needs new boards, we can point you to our ceiling installation page for that specific work.
Frequently asked questions
What is plasterboard fitting used for?
It is used to create a more even background for walls, linings, partitions or boxed-in areas. In homes, it can be a good way to renew surfaces that are too uneven or awkward for simpler repair. The exact approach depends on the room, the backing and the finish you want on top.
Can you board over an existing wall?
Sometimes, yes, if the wall and the background behind it are suitable. We need to look at how sound the existing surface is, how much build-up is acceptable and what is causing the problem in the first place. In other cases, a repair or a different boarding method may make more sense.
Should plasterboard be jointed or skimmed?
Both routes are possible, depending on the job and the finish you want. Skimming creates one continuous plastered face, while joint treatment deals with the board joints directly. We can explain which approach fits the wall layout and the standard of finish you want to decorate over.